Welcome to Consumer Reports!

Home tools Buyer's Guides from tech enthusiast who loves technology and clever solutions for better living.

Check Today Price

Best pond pumps 2018 – [Buyer’s Guide]

Last Updated May 1, 2019
Share on Facebook0Share on Google+0Pin on Pinterest0Share on StumbleUpon0Tweet about this on Twitter

Charlie OliverHey, I’m Charlie Oliver. Let’s discuss this topic to help you select best pond pumps for 2018 and take your experience to a whole new level with aerators.

I have been writing about technology and entertainment since the early 90s from my secluded home in West Virginia. In this article, I’ve listed down the Top 3 list. These are the best pond pumps your money can buy.

Best pond pumps of 2018

Many brands have introduced pond pumps on the market. These brands have resulted in a variety for the user. These require that the consumers be well aware of what they are buying so as to make the best choice. I make the search easier for you, by reviewing the best pond pumps on the market.

The rating is based on multiple factors: The 3 metrics ‐ Design, Materials, Performance, and other indicators such as: Popularity, Opinions, Brand, Reputation and more. If you get well acquainted with these basics, you shouldn’t have a problem choosing a pond pumps that suits your need.

Test Results and Ratings

Rank №1 №2 №3
Product
Total 4.8 4.5 4.3
Ease of use
5 points
5 points
4 points
Size
4 points
5 points
4 points
Performance
5 points
4 points
4 points
Quality
5 points
4 points
5 points
Awards 1
button button button
banner banner banner

 

 

 

 

How to save up to 86%? Here is little trick.

You must visit the page of sales. Here is the link. If you don’t care about which brand is better, then you can choose the pond pumps by the price and buy from the one who will offer the greatest discount.

 

 

№1 – Sunnydaze Electric Water Pond Pump with Filter and 3 Heads Spray Heads

 
Sunnydaze Electric Water Pond Pump with Filter and 3 Heads Spray Heads

Pros
JR-1330 pump dimensions: 2.5 inches wide x 5.5 inches long x 3 inches high; 1 inch hose diameter; 350 GPH with up to a 7.4-foot lift.
Pond filter that sits inside of the water pump prevents debris from entering and extends the life of the pump.
Each package includes a submersible electric pond pump with filter, a long 6-foot 3-prong electrical cord for convenient use, adjustable water flow part, 2 extension pieces, 3 spray heads and 3 hose outlet adapters that will fit a 1/2 inch, 5/8 inch or 3/4 inch inside diameter hose.
Cons
I didn’t notice a single drawback yet
 
Total:
4.8

Why did this pond pumps win the first place?

I don’t know anything about other models from this brand, but I am fully satisfied with this product. I am very happy with the purchase. It is definitely worth its money. The product is top-notch! I really enjoy the design. It is compact, comfortable and reliable. And it looks amazing! The material is stylish, but it smells for the first couple of days.

banner2


Ease of use
5

5star

Size
4

4star

Performance
5

5star

Quality
5

5star

 

 

№2 – HEALiNK DC 12V 140LPM/Min 2220GPH Aquarium Air Pumps Compressor Aerator 130W for Aquaculture Fish Pond

 
HEALiNK DC 12V 140LPM/Min 2220GPH Aquarium Air Pumps Compressor Aerator 130W for Aquaculture Fish Pond

Pros
OUTPUT: 115LPM /Min POWER: 130W VOLTAGE: DC 12V PRESSURE: 0.15Mpa
Adopt super-quality DC permanent motor, which makes the piston move reciprocally in the cylinder and produce air flow that is large in output and high pressure.
Non-oil lubricating design to produce purer compressed air.
Cons
A little bit heavy.
Borderline outdated technology.
 
Total:
4.5

Why did this pond pumps come in second place?

Managers explained me all the details about the product range, price, and delivery. The material is pretty strong and easy to wash if needed. I recommend you to consider buying this model, it definitely worth its money. This is a pretty decent product that perfectly fitted the interior of our office.

banner2


Ease of use
5

5star

Size
5

5star

Performance
4

4star

Quality
4

4star

 

 

№3 – Active Aqua Submersible Water Pump

 
Active Aqua Submersible Water Pump

Pros
Recommended for 100+ gallon reservoirs
1,000 gallons per hour
Indoor / outdoor use
Cons
The price is slightly higher than other competitors.
Longevity is in question.
 
Total:
4.3

Why did this pond pumps take third place?

I liked the design. We’ve been using it for 2 months and it still looks like brand new. It is inconvenient to use due to the size. I am going to get something different next time. It doesn’t squeaks nor bents. Looks great in my apartment. A very convenient model. It is affordable and made of high-quality materials.

banner2


Ease of use
4

4star

Size
4

4star

Performance
4

4star

Quality
5

5star

 

 

pond pumps Buyer’s Guide

If you keep the before points in mind, you can easily go out to the market and buy pond pumps, right? No!

The submersible pumps use the magnetic drive concept.

Magnetic drive refers to the coupling between the pump impeller and the electric motor. The impeller spins and pushes the water. The impeller magnet is surrounded by the motor. The electric motor has no moving parts. It simply creates an electric field that causes the impeller to spin.

Submersible pumps are very simple. Only the impeller moves. The other style is direct drive.

With direct drive pumps, the impeller of the pump is attached to the shaft of an electric motor. The shaft must be sealed prevent the water from seeping out. Direct drive pumps must be located outside of the pump. Keep in mind that some magnetic drive pumps are designed to be used in-line only.

Most in-line water pumps are not self-priming. That means they must be positioned below the water line so water is always inside the pump. Self-priming pumps tend to be larger and are very similar to swimming pool and spa water pumps. They are able to pull water from the pond and into the pump. This means the pump does not have to be placed below the water level.

Selecting a water pump for a waterfall

Calculating the right size pump for a waterfall might seem daunting. Don’t worry. Here is a simple way to figure it out.

Select a waterfall pump that moves 100 gallons per hour for every inch of waterfall width. For example: for an 18-inch wide waterfall, use an 1800 gallon-per-hour pump (calculated for the head height).

For a gentler flow, use a 900-1800 gallon-per-hour pump. For a roaring flow use a 2400-3600 gallon-per-hour Pump. These figures can be adjusted for any waterfall.

Alpine PAL3100 Cyclone Pump

The Alpine Cyclone water pump can be used submerged or in-line, outside of the pond.

The pump is not self-priming but it can be used outside of the water, below the water level.

The pump comes with a very helpful manual that fully describes how to use the pump and how to take it apart for cleaning and parts replacement.

It comes with a barbed hose adapter for hose from ¾” to ½” I.D.

Sequence 750

The Sequence 750 pond pump is an in-line water pump. It is not self-priming and must be positioned below the water line, outside of the pond.

The Sequence 750 uses a centrifugal-style impeller to pump the water.

Centrifugal pumps are energy-efficient and quiet-running. This is especially important when running the pump near the pond.

The 750 comes with an 8-foot power cord. The electric pump motor is an industrial-grade 1/horsepower unit.

The water pump housing has a drain plug. This is helpful when draining the water inside the pump to prevent freezing damage.

Filtration works as an eliminator of sewage, dirt and biological waste. These elements continuously accumulate in your pond and harm your fish and their environment. A filter’s job is to pull out these harmful materials out by drawing dirty water from the pond, pushing it into some filtering materials and then releasing clean water back to the pond.

We also have the

UV sterilizers, which technically are not water filters. Also called clarifiers, the function of sterilizers is kill organic particulates. That includes bacteria, viruses, algae and fungi. Garden pond clarifiers alter the cellular structure of microorganisms, thus killing them.

How To Select the Right Pond Pump

Choosing the right pond pump can be a bit confusing, there are many models and brands to choose from nowadays, how do you choose? Although the initial purchase price is usually the main consideration when buying a pond pump, there are a few other more important aspects to bear in mind.

Here are some factors that you may want to consider when purchasing a pump for your pond or waterfall.

Pond Size

The size of your pond is critical in determining what pump to buy. Too small a pump will cause poor circulation and stagnant area in the pond leading to low oxygen levels, sludge build-up and poor water quality. These factors result in an unhealthy pond and in turn unhealthy fish. Your pump should circulate the volume of your pond a minimum of once very hours, ideally once per hour.

Waterfall Width

A general rule of thumb is to calculate a set flow of water (in GPH) for every inch of width of water at the top of your waterfall. Sounds a little complicated, but it is really quite simple to figure out.

All you need to do is measure the width of your waterfall (in inches) and multiply that by 100, 150, or 200 depending on the  look you are trying to achieve.

This unit is slightly louder than advertised

The HI-BLOW (HP 80) Linear Air Pump has been given a rating of out of stars by our editor and is considered to be one of the best quality air pumps used with aerobic septic systems on the market today. These pumps feature quiet operation, low power consumption, low pulsation and low vibration, are very easy to service, and have a long life. They are also a compatible replacement for the Thomas 5080 and 5078, Gast SPP-80, and a large number of other 80-LPM (liter per minute, or volumetric flow rate) air pumps.

The HP-80 HI-BlOW Linear Air Pump Pond Aeration Septic Aerator weighs pounds and measures 9.3″ x 7.1″ x 7.8″. It provides 3.PSI (Pound Per Square Inch) of maximum continuous operating pressure, 80 liters of APM (Air Per Minute) and 4.CFM (Cubic Feet Per Minute) maximum air flow. This clean oil-less air pump is 120VAC, 7watts, 60 Hz (Hertz of cycle per second), and comes with a 90-degree rubber elbow plus alarm connection fitting. It is the most used aerator pump on 500 gallons-per-day systems.

This pump is septic UL (Underwriters Laboratories) approved and provides excellent septic tank aeration. It is durable, simple to install, and comes with spare parts and a manual. It can be run off a solar system using a 9″ diffuser. Many air pumps in the market must replace their diaphragms about every 1months, but this HI-Blow pump should last at least 4-years before diaphragm replacement is required.

Cord is too short

Our editor has given the Homasy 400GPH Submersible Water Pump the highest rating of out of stars for good reason. This high-quality pump comes with a 25W water fountain pump with a 5.9′ power cord and nozzles, making it perfect for hydroponic systems, aquariums, ponds, statuary, spout systems, water fountains, tabletop fountains, or fish tank use. It has an adjustable water flow control knob with a maximum flow rate of 400 GPH (Gallons Per Hour) which allows you to control how many bubbles are produced, and a maximum lift height of 6.9′, which ensures that water won’t go up higher than this height after you’ve connected the nozzle to the water pipe.

This pump weighs only 1.pounds and measures 6.1″ x 3″ x 4.5″. It features nozzles – a 0.51″ and a 0.62″ with threaded fittings for added stability. It has a stainless steel impeller shaft for corrosion resistance and a longer lifespan and powerful suction cups located on the pump bottom to help it stay in place – either horizontally or vertically on the right-hand side of the aquarium. It’s 5.9′ cable is the perfect length for easy installation, and its high-efficiency 25W motor provides quiet operation.

The Homasy 400GPH aerates and circulates the water, which makes the pond more attractive to turtles and fish. This very inexpensive product provides fish with a clean, near-natural environment for smaller ponds, medium-sized aquariums, desktop water fountains, and water gardens. It comes with a 12-month warranty and a guarantee of professional after-sale service beginning within 2hours of purchase.

Runs hot and is fairly loud

Our editor has given a rating of 4.stars out of stars for this popular and attractively priced outlet air pump for hydroponic systems and aquariums. This commercial unit has been specially designed to furnish oxygen for fish farms, aquariums, inflation, dusting, manufacture, and so much more. It turns out 950 GPH, uses 3watts 60 liters per minute, and its chrome air manifold ranges from 1-outlets.

This commercial air pump is made of aluminum and copper alloy, its shipping weight is 3.7pounds, and its package height is 5.51″ x 6.61″ x 17.99″. The pistons and cylinders are strong and durable, and it has no problem running multiple air stones or several water farms at the same time. This product comes with air pump, air manifold, outlet nozzle, and additional pipe, and also comes with a user manual.

The Vivosun Air Pump 950 GPH has performed well on tournament regulation weigh-in tanks, 120-gallon fish tanks, an indoor Deep Water Culture System (DWC), as well as a typical small goldfish pond. This pump generates enough air to be able to aerate a 275-gallon tank containing 2fish. For its size, it has a considerable amount of power and output. The unit does heat up after days of continual work, but you can avoid burning your hand by touching only the handle when it gets hot. Another suggestion is to purchase a small fan and keep it turned on at all times near the pump.

Our editor has given the Active Aqua 1000 GPH Submersible Water Pump a rating of 4.out of stars. This pump has been specially constructed to run beneath the waterline. It features a variety of different sized hose fittings so a perfect fit can be achieved every time. It also comes with removable foam filters, rubber mounting-feet for vibration reduction, impellers, and a heavy duty 10-foot power cord. This pump is UL-listed, has 9watts / 120 VAC, and comes with a 1-year warranty.

The Active Aqua Submersible Water Pump is plastic, weighs 4.pounds, and measures 5.2″ x 5.51″ x 9.49″. It has been used successfully to recirculate water in a 250-gallon Aquaponic setup, to push water vertical a minimum of 6′ high, to operate a fountain, and to pump water out of a water-collection tank into a low-pressure water inlet valve. Some buyers don’t use a bucket and merely throw this pump into a pond and let it do its job, and then remember to clean the debris out of the grate every so often.

This water pump is powerful and very reasonably priced, a win-win combination. Its several different fittings allow the user to match it up easily with any existing lines. Customers report complete success with using it for a 1000-gallon koi pond, a 400-gallon goldfish pond, a tetra pond filler, stream, and waterfall, and for pumping feet uphill into an aquaponics system.

Our editor has given the Alpine Cyclone 8000GPH Waterfall And Pond Pump a rating of out of a possible stars. This relatively expensive pump is made of high-grade plastic with water-resistant ceramic bearings and a completely removable rotor assembly, and can be used either horizontally or vertically. It features exceptionally a sturdy high-performance asynchronous motors that can operate both out of and in the water (if you are using this pump outside the pond, make sure that it is situated below water level).

The Alpine Cyclone Pond and Waterfall Pump weighs 1pounds and measures 10″ x 6″ x 7″. It has a specially designed vortex impeller that is perfect for low power consumption and maximum water output. It also features a pre-filter anti-clog cage screen that provides very low maintenance and handling of solids up to approximately 1/4″.

The Alpine Cyclone Pump provides a maximum flow rate of 8000 GPH and a maximum head pressure of 26′. It has 700 watts, a 33′ power cord, and comes with a 3-year warranty. These pumps are designed for heavy duty filter systems or waterfalls and have the horsepower necessary to move large amounts of water continuously.

This pump must only be operated when water is running through it, and must not be operated dry. The pump must also be primed before it is turned on by feeding water into the tubing both outside and inside the pump to create the correct suction effect for drawing water from its source.

WHY YOU NEED A PUMP FOR YOUR POND

Pumps are necessary to keep pond water clean and full of oxygen, which is essential for any pond containing fish that actively produces nitrogen-rich waste material. It’s vital to circulate water found in the deepest part of a pond so that it will break down any organic compounds and provide better water quality, especially during warmer weather. Whenever a pond bottom is exposed to water that is oxygen-rich, you will be encouraging aerobic bacteria (which uses oxygen) to break down any organic matter, which will, in turn, reduce any foul pond odors.

Because oxygen can only be absorbed through the water’s surface, it’s very likely that you might have a surplus of plants in your pond. If the pond’s total surface area is covered up by water lilies or any other type of surface plants, little or no gas exchange can occur unless there’s a waterfall or large fountain present. Perhaps you’ve been told that you will create more oxygen in your pond if you increase the number of underwater plants in it. This will add a little oxygen during the daytime, but the primary function of marine plants is to starve out algae by using up the available nutrients.

A pump becomes necessary when the amount of fish in it increases. Fish population increase causes problems with both fish health and the water quality. It is particularly important to use a pump during the warmer months since, the hotter water becomes, the less oxygen that it will be able to hold. Cold water, on the other hand, holds on to a more considerable amount of oxygen and combined with the slow respiration rate of fish in wintertime you probably won’t need to add any additional aeration to your pond.

A pump failure in sweltering weather is a very rapid way to kill off your fish. The best way to ward off this possible disaster is to maintain a second aeration pump. A backup pump, even if you don’t operate it continuously, can save your fish if your primary pump fails. Remember, a pump failure in very hot weather can kill off the fish after only a few hours.

PUMP FOR WATERFALL OR FOUNTAIN

It’s necessary to determine the width of a waterfall, how many feet of tubing will lie between a pond pump and a waterfall, and how high up the waterfall starts from the pond surface when sizing a pump. You should choose a pump that can move 100 gallons an hour for each inch of the width of the waterfall. An 18″ waterfall is perfect for an 1800 gallon-per-hour pump.

Optimal fountain pumps should move between 70 and 400 gallons-per-hour to cover a range from tabletop fountains to huge 4-tier fountains. They should be magnetic drive and an adjustable flow and have at least a 6′ long power cord.

DIFFERENCE BETWEEN A PUMP VS POND AIR AERATION

Aeration systems are available for ponds and are called variable pond aerators, air compressors, or air pumps. A fountain aerator is usually a floating water pump with a nozzle that can spray water up into the air. It operates by sucking in the water that’s surrounding the pump. This pump is useful for ponds no deeper than feet. For ponds that are 6′ or more, you can use a diffused pond-aeration system, which uses tubing, an air compressor, and a diffuser or air bubbler on the bottom.

Pond aerators can aerate ponds as small as 500 gallons to basins as large as 20,000 gallons, depending on what size the compressor is. They tend to be quiet, energy efficient, and require little maintenance. What is the difference between a traditional pond pump and a pond aerator? Pond aerators recirculate pond water and therefore increase oxygen that is suspended in the water. They also make sure that the majority of the pond’s oxygen and heat stay near the water’s surface. Pond pumps with filtration systems are useful for fish ponds where this is a buildup of ammonia in the water coming from fish waste. If your pond is man made you will not need the benefits of pond aeration and oxygenation.

SUBMERSIBLE POND PUMPS

Submersible pond pumps are more subtle, and they frequently are used for aesthetic reasons – because it’s not visible, it provides a prettier effect. These pumps are specifically designed to be installed completely beneath the water surface and are placed in the deepest parts of a pond. Make sure that the cord length is long enough to reach an outlet that has a GFCI (Ground Fault Circuit Interrupter). They are a snap to install – just put the pump (and filter, if it has one) into the water. Maintaining a submersible pump pond is more difficult because you must regularly pull it out of the water to clean its screen or pre-filter.

HOW TO MAINTAIN YOUR PUMP

Your pond pump will need periodic attention so that it will keep operating efficiently and safely for many years to come. The most important thing is not to worry about getting your hands wet. About once a month (or more, if necessary) check out your pond pump to make sure that no leaves or debris is blocking the inlets. If there is give it a rapid cleaning and try to reposition the pump into an area that might have less debris.

When the temperature starts to drop, you’ll need to check the water level of your pond once a week. If the level is low fill it up to normal. The last thing you want is for your pump to burn out by sucking air. Check that no sand has been whipped up by wind in the water. Sand will break down an impeller over time and will eventually lead to you having to replace the impeller.

Double check that your pump cable isn’t sitting directly in the sun. Too much sunlight can damage the wire, and without that cable there won’t be any pumping. If you’re using the pump in a water feature or fountain make sure that you never put any chlorine into the water. Chlorine will break down any plastic in the pump as well as in the cable. If you must treat the water, purchase an algae controller instead of chlorine. Another important tip is not to turn the pump off and on too much – just let it run. You will save on electricity as well.

Aquascape Pond Air Aeration Kit

The Aquascape Pond Air provides years of trouble-free operation and comes complete with everything you need. It features a strong outer housing, a thick rubber gasket that helps reduce noise and vibration, and a wide, flat base that makes it stable and easy to place.

SOLAR POND AERATORS

Solar-powered aerators are also available which work like the air pumps in fish-tanks – attaching to a perforated artificial stone and bubbling air directly into the water. Although many of them are designed for quite small ponds, they can also be used very effectively to supplement other methods of aeration in larger ponds too. Solar-powered equipment, inevitably, works at its best during the sunnier months, which fortunately coincides with the pond’s maximum need for additional oxygen. Since warm water naturally holds less oxygen than cold and fish and other aquatic life are at their most active in the summer, the “green” solution can certainly play its part.

SunnyTech Solar Power Pond Oxygenator Air Pump

The SunnyTech solar air pump is a perfect aeration system for mini ponds or aquariums. This unit has battery backup once the batteries are fully charged they can run for 50-60 hours with no further sun light.

This little solar pond air is 100% powered by a small solar panel does not require any wiring, ensuring a quick and easy installation. The solar panel should be placed in an outdoor area to ensure exposure to sunlight, and connected to the main unit before the air stones are dropped into the pond. Because it is fully waterproof, it can be placed outdoors all year round.

AerMaster Aerator Solar Koi Pond 2

This AerMaster Aerator Solar Koi Pond is a great aeration system for ponds up to 6ft. in depth and up to 14,000 gallons water. It comes as a turnkey system. There is nothing else to buy other than some concrete to set your post.

It features battery-free operation which means the manufacturer has eliminated the expense of rechargeable batteries and charge controllers making the system much less expensive and yet affordable for most small pond owners.

Where to position your pump

In general the best location to have the pump is as close to the surface of the water as possible, many people tend to overlook this and install the pump at the bottom of their container or pond, the best way to look at this is that the further that the pump has to push water, the more energy it takes, additionally the bottom of a water container is where most of the organic debris settles, this can clog the filter of the pump and make it harder to push water.

If your pump is close to the surface of the water then it will take far less energy for the pump to push the water up, additionally your pump will remain far cleaner, this means that in most cases you will be able to turn the power of your pump down (via a dial on the pump) to achieve the same result, more power will remain in your battery, which means that your solar power fountain will last longer in terms of operation and will also operate more consistently.

Suckers

Each pump has suckers fitted to the bottom, this allows you to ‘stick’ the pump to a flat surface, to do this many customers use a piece of non porous flat material for example slate, and then place this on top of a column that has been built inside the pond, for example some customers use an upturned flower pot to create a raised column and then place the slate on top.

The float is one of the best ways to fit your pump, because this solution ensures that the pump is just below the surface of the water, there is also the additional benefit that the float will automatically raise or lower itself according to the level of the water in the pond, for example if evaporation occurs on a hot day, or the pond is refilled with water.

Tethering the pump does ensure that there is no movement, if there is not a possibility of using the suckers then simple string can tether the pump in location, however please ensure that you can easily remove the pump when you need to clean the filter out.

Locating the solar panel

With solar power it’s all about light, light generates a voltage and this is stored in the battery so the location of the solar panel is of paramount importance.

For the best possible results the panel needs to be South facing and angled towards mid day sun, without shade if possible. The fountains will work facing east or west however the performance will be diminished.

If you cannot avoid shade then it is better to go for an amorphous silicon solar panel for example the Sunspray SE 360 : Amorphous silicon panels are designed to work better is shadier environments. Many customers compare solar led lights with fountains, but it is much more difficult for fountains to work well in shadier conditions as there is a lot more energy needed to physically move water than to illuminate an led. However if you choose the correct model and try to locate the panel in the sunniest position, combined with buying a good quality solar fountain, then you can achieve very satisfying results.

Kirloskar

Crompton, CRI, TEXMO and MXVOLT having HP & 1.HP motor power. We also provide control panels to be used together with some models like: Kirloskar KPJalraaj 1008S, Kirloskar 1009S, Kirloskar 0713S and MXVOLT HP submersible pump. You can also grab the best deals for other bore sizes like inches (V3), inches (V5) and inches (V8).

Before you dive into your pond, rip out the pump, package it up and send it back to where you bought it, you can save yourself the bother by some simple procedures.

Find A Store

These AQUAPRO fountain pumps feature outstanding value for money and reliability. They have been manufactured with advanced technology to provide you with the best quality pump for your pond or waterfeature.

They come with a full range of fountain accessories, such as a bell nozzle and daisy nozzle. AQUAPRO pumps are suitable for use in many different applications either submersible or inline and suitable for fresh and saltwater application.

 

 

 

 

How to save up to 86%? Here is little trick.

You must visit the page of sales. Here is the link. If you don’t care about which brand is better, then you can choose the pond pumps by the price and buy from the one who will offer the greatest discount.

 

 

Final Word

First of all thanks for reading my article to the end! I hope you find my reviews listed here useful and that it allows you to make a proper comparison of what is best to fit your needs and budget. Don’t be afraid to try more than one product if your first pick doesn’t do the trick.

Most important, have fun and choose your pond pumps wisely! Good luck!

So, TOP3 of pond pumps

 

 

Questions? Leave a comment below!

Chatting about pond pumps is my passion! Leave me a question in the comments, I answer each and every one and would love to get to know you better!



Leave a comment!

Let us know what you have to say:

RECENTLY REVIEWED

Best travel iron 2018 – [Buyer’s Guide]
Best play kitchen 2018 – [Buyer’s Guide]
Best muscle stimulator 2018 – [Buyer’s Guide]
Best bluetooth helmet 2018 – [Buyer’s Guide]
Best paintball hopper 2018 – [Buyer’s Guide]


AFFILIATE DISCLOSURE

Some posts may contain affiliate links. 3-beasts.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
FOLLOW US

       
 
COPYRIGHT © 2017 · 3-beasts.com · ALL RIGHTS RESERVED
DMCA.com Protection Status